Drawer Pulls

2013.11.25

A few months ago, I bought a couple wooden drawer pulls, and ebonized them with india ink.

Drawer pulls before ebonizing
Drawer pulls ebonized with india ink

I added a couple coats of platina shellac while I was finishing the nightstands, and picked up #12 slotted screws to install them.  I marked the center of each drawer front on a piece of blue tape, and drilled a clearance hole for the screw.

Marking center of drawer to install pull
Hole drilled for screw to attach drawer pull
Screw for drawer pull
Nightstand drawer with pull installed

One final task remained: cleaning up.

Shavings pile at end of nightstand project
Shop cleaned up for the next project