Drill Press Cabinet and Table
2014.01.13
I have decided to build a rolling cabinet for my drill press to sit on, and to store other drills and bits. I glued 1x12 pine into panels for the sides, top, and bottom. Today I rabbeted the panels to receive a plywood back, and started working on the dovetails.
2014.02.01
More dovetails. Really for something so utilitarian I should have used wider pins for strength, but no matter, it will be fine. Warped panels and somewhat sloppy dovetails required every bar clamp I own to glue the case together.
2014.02.04
I nailed on a 1/2″ plywood back. Then I added a shelf and some casters.
